Guides for Camberley homeowners

Bespoke, modular or flat-pack: three ways to get fitted furniture

There is more than one way to fill a wall with wardrobes or an alcove with cupboards. The most expensive route is not always the right one, and the cheapest often costs more than its price tag.

The fitted wardrobes cost guide sorts the options into three groups. They apply just as well to studies, alcoves and media units.

Route one: fully bespoke

A carpenter or joiner designs the piece for your room and makes every part to size. Carcasses, doors, shelves and trims are all cut for that wall and no other.

This is the route for awkward spaces: sloping ceilings, chimney breasts, bay windows, rooms where no two corners are square. It is also the route if you care about detail, such as doors that line up with the window head or a cornice that matches the room.

It costs the most because of the hours. There is design time, cutting time and finishing time before anything reaches your house. The guide's bespoke band for wardrobes is £4,000 to £6,000 for a standard installation.

Route two: modular units, fitted in

Here the carcasses come in standard widths from a supplier. A fitter arranges them along the wall and closes the leftover gaps with filler panels, then adds doors, plinth and trims.

On a straight wall with a level ceiling, the result can look close to bespoke for less money. The compromise is inside. Unit widths are fixed, so you may get a 300 millimetre section where you wanted 450.

The same guide warns that if a room needs a lot of filler panels and adjustment, the price climbs towards the bespoke figure. In that case you may as well have the real thing.

Route three: a flat-pack system, adapted

This means buying a wardrobe or storage system from a DIY or furniture store and paying someone to build it in. A carpenter assembles the units, fixes them to the wall, and builds a frame and infill panels round them so they look fitted.

The appeal is a clear shelf price. The catch, as the cost guide points out, is that labour and extra materials can take the total higher than expected, most of all in small rooms and rooms with uneven walls.

It can work well when the system happens to suit the wall. Ask the carpenter before you buy. Some will take this work and some prefer not to, because the result depends on boards they did not choose.

Side by side

  • Fit. Bespoke uses every millimetre. Modular loses a little to fillers. Flat-pack loses the most.
  • Inside layout. Bespoke is whatever you ask for. The other two are set by the maker's range.
  • Finish. Bespoke can be sprayed or brushed in any colour. Modular and flat-pack come in the supplier's finishes, though doors can sometimes be painted.
  • Lead time. Bespoke is longest, as it has to be made. Flat-pack is quickest to obtain.
  • Strength. Depends on board thickness. Ask what you are getting on any route.
  • Cost. Usually bespoke at the top and flat-pack at the bottom, with the gap narrowing as the room gets more awkward.

Which suits which house

A plain rectangular bedroom in a newer house, with flat walls and a level ceiling, is where modular and flat-pack routes do best. Many detached and semi-detached houses have exactly that kind of room.

A room in the roof, a wall with a chimney breast, or a lounge where the units will be on show every day leans towards bespoke. So does anything you want to match existing joinery.

You can also mix. Bespoke alcove units in the lounge, where looks matter most, and a modular run in the spare room is a sensible split.

A fair way to decide

Ask for two prices for the same wall: one made to measure, and one using bought-in units if the carpenter offers that. Compare the totals with everything included, fitting and finish too.

Then ask yourself how long you will live with it. Fitted furniture stays for as long as you do. Spread over ten or fifteen years, the difference between routes is smaller than it looks on the day. Read more on fitted wardrobes or home offices.

Common questions

Will a carpenter fit furniture I have bought myself?

Many will, and it is worth asking before you order. Send the product details so they can check it suits the wall. Be clear about who is responsible if a part arrives damaged or missing.

Is bespoke furniture always better quality?

No. Quality comes from the board, the hardware, the finish and the care in fitting. A well-fitted modular run can outlast a poorly made bespoke one. Bespoke gives you the choice of every one of those things. It is still up to you to ask for good ones.

Get both prices and then choose

Guessing which route is cheaper is how people end up with a flat-pack system that does not fit and a carpenter's bill to rescue it. One conversation before you buy anything avoids that.

Describe the wall and say which routes you are open to. Add your area and send the form.

Ask a Camberley carpenter for a price

Four short boxes. No email address needed.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

Get a free quote