Carpenters in Camberley, Surrey

Wall panelling in Camberley: shaker, tongue and groove or slatted panels fitted, with a free quote

Wall panelling is timber or MDF panels fixed to a wall, in a lounge, bedroom, hall or up the stairs. Fill in the short form, pick a time for the call back, and a local carpenter rings you then with a free quote.

Ask a Camberley carpenter for a price

Four short boxes. No email address needed.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

  • Shaker grids, tongue and groove, half-height and full-height
  • Slatted and acoustic panels for a study or media wall
  • Spacing worked out round sockets, switches and windows
  • Guide prices for one wall and for hall, stairs and landing

A plain wall that needs something

Larger rooms have larger walls, and a long plain one can feel like the side of a box. You hang a picture and it looks lost. You paint it a strong colour and it shouts.

The hall and stairs are the same problem on a slope. Scuffs from bags and shoes show within months of each repaint.

You may have tried a stick-on panelling kit, or thought about it. They can look fine in a photo. In the room, the strips sit proud of the skirting, the squares come out different sizes at each end, and one lands half across a light switch.

How to get your free quote

  1. Describe the space

    Type in what you have in mind and the room it is for. A width, a ceiling height and the finish you like are enough to begin with. Add your name, number and which part of Camberley you are in.

  2. A carpenter phones you

    The phone rings at the hour you picked. Expect a few sensible questions about the wall, the sockets and what you want to store. Fitted work nearly always needs a visit with a tape measure, so a time for that is agreed on the call.

  3. You get a price to think over

    Have it sent in writing with the materials and finish spelled out. Sleep on it. Say yes, say no or ask for changes. Asking for the price costs you nothing.

How panelling is set out

Panelling is simple to fix and hard to plan. A carpenter begins with a drawing of the wall, not with a saw.

The width between uprights is adjusted until the panels come out equal across the whole wall, with full panels at each end. Sockets and switches are placed inside a panel or centred on a rail, never half and half. On a staircase, the top rail follows the pitch of the stairs and every upright stays plumb.

Then there are the edges. The bottom rail has to meet the skirting cleanly, which often means new, flatter skirting. The top needs a neat capping. At a door frame the panelling should die into the architrave without a step.

Done well, nobody notices any of this. They just think the room looks right.

Styles, and where each one suits

Shaker panelling

Flat strips forming a grid of squares or tall rectangles. Clean and unfussy, it suits most houses and most rooms. Usually MDF, painted.

Tongue and groove

Vertical boards with a fine line between them, often to dado height with a shelf-like cap. A good choice for halls, cloakrooms and boot rooms because it shrugs off knocks.

Moulded panels

Thin mouldings applied in frames for a traditional look. They suit rooms with higher ceilings and cornices.

Timber slats

Narrow oak or walnut-faced slats on a felt backing. Popular behind a television or a desk, where they also soften the sound in the room.

Published guide prices for panelling

Choose between a single wall and a hall, stairs and landing. The figures are from the cost guide, dated September 2026.

Want a real price for this? Ask here

Four short boxes. No email address needed.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

The full price list

JobUK guide price
Wall panelling: One wallPanelling a typical wall of 8.5 square metres, materials and labour. The typical figure is the guide's price for pine shaker panels on a living room wall of that size.£250 to £1,350typical about £425
Wall panelling: Hall, stairs and landingPanelling a hall, stairs and landing. The guide prices this higher than a single wall because of the angles and the number of small walls.£500 to £1,200

Guide figures only. Each one comes from a published UK cost guide and covers a typical job across the country. A price for your home will move with the size of the space, the board or timber, the finish and how straight your walls and floors are.

More from the same guide

One cost guide gives an overall range of £30 to £160 a square metre for wall panelling, depending on material and style. It prices half-height panelling, which it calls wainscoting, at £85 to £450. For labour it gives £210 a day for a joiner or carpenter and £175 for a painter.

Two extras from that guide are worth knowing. Moving a radiator adds around £150. Replacing the skirting adds about £250. Both come up often, because a radiator in the middle of a feature wall spoils the grid.

Where panelling works in Camberley homes

The long hall and galleried landing of a detached house are natural places for it. Half-height panelling up the stairs protects the wall where hands and bags touch it.

In a main bedroom, a panelled wall behind the bed gives the room a centre. In a lounge, panelling either side of a chimney breast ties in with alcove units. In a study it makes a calm background for calls, which is why it is often asked for along with a fitted home office.

Things worth knowing before you ask

  • It is free to ask. There is no fee for sending the form or for the call back, and you are under no obligation to accept the price you are given.
  • Very little is asked of you. A name, a phone number, your area and the job. No email, no street address, no account to set up.
  • The prices here are guide prices. Each figure on this site is a guide price taken from published UK cost guides. They are there to help you budget. Your own home will have its own price.
  • What you send is used for one thing. Your details go towards getting your carpentry priced. They are not sold and not added to a mailing list.

Common questions

Do the walls need to be perfect before panelling?

They need to be sound and dry, not perfect. Panelling hides hairline cracks and minor dents. It will not hide damp, and it will follow a badly bowed wall unless the carpenter packs it out. Loose or blown plaster should be repaired first.

Is MDF panelling all right in a bathroom or cloakroom?

Use the moisture-resistant grade, prime every cut edge and keep it away from direct splashing. For a wall beside a bath or shower, a waterproof panel made for wet areas is the safer choice. Tell the carpenter which room it is.

Who paints it?

Arrangements vary. Some carpenters fill, caulk and paint. Others leave it filled and primed for you or a decorator. The finish matters a great deal with panelling, since every joint shows under paint, so settle this before work begins and make sure the quote says which.

Do it before the room is painted, not after

Panelling goes on before the final coats of paint and ideally before new carpet. If the hall is due for redoing anyway, fitting panels first means you pay for painting once. Put it off and that scuffed stair wall gets repainted yet again in a year.

Name the walls, the style and the rough sizes. Say where you are around Camberley.

Ask a Camberley carpenter for a price

Four short boxes. No email address needed.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

Get a free quote